working principle
The material is stirred through the center of the upper part of the emulsification pot, and the polytetrafluoroethylene scraper always caters to the shape of the mixing pot, sweeps away the sticky material hanging on the wall, and makes the scraped material continuously generate a new interface, and then is sheared and compressed by the blade and the rotating blade. , folded to make it stir and mix and flow down to the homogenizer below the pot body, the material then passes through the strong shearing, impacting, turbulent flow and other processes generated between the high-speed rotating cutting wheel and the fixed cutting sleeve, The material is cut in the shearing slit and quickly broken into particles of 200nm-2um. Since the emulsification tank is in a vacuum state, the bubbles generated during the stirring process of the material are removed in time. The method of vacuuming is adopted, so that the produced products are no longer mixed with air bubbles during the stirring process, so as to ensure that high-quality products with luster, fineness and good ductility can be produced.
Features
In the manufacturing process of high-viscosity emulsions, especially creams, ointments, and emulsion products, the most problematic aspects are the large particle size of the dispersed phase and the mixing of air into the product during stirring. , lack of luster; air mixed in the product will make the product bubble, bacterial contamination, easy to oxidize and not smooth in appearance.
Post time: Mar-04-2022