News - What testing equipment can be used in the cosmetics industry?

As today’s fashionable consumer goods, cosmetics are demanded by men and women in the market. Cosmetics require not only exquisite packaging, but also the best protection for products during transportation or shelf life. As a domestic manufacturer of testing instruments for many years, the emulsifier manufacturer is now combining the requirements of cosmetic packaging testing and application to summarize the testing items. Today, we will introduce how to control cosmetic packaging for the majority of manufacturers in the industry. For cosmetics to reach consumers in good condition after transportation, shelf display, etc., good transportation packaging is required.

Therefore, during the serial transportation of cosmetics, it is necessary to test the compressive strength and stacking test of the cartons.

Packaging compression testing machine

In the testing process of this machine, the unique computer digital power, displacement, and speed three closed-loop control are used, together with Taiwan Motor and Taiwan Delta inverter control system, to achieve full computer digital operation. It is widely used to test corrugated boxes and other packaging containers for compression, static pressure and stacking and other physical properties tests. The transmission system adopts Taiwan VGM worm gear reducer and Taiwan VCS precision screw drive to achieve the best transmission efficiency and performance-to-noise ratio. Easy to operate, high precision, wide speed range, high sampling frequency.

Carton Compression Tester

Carton Compressive Strength Test: Corresponding introduction is given here with the carton compression testing machine. During the test, place the corrugated carton between the two pressure plates of the carton compression tester, set the compression speed, and start the test until the pressure when the carton is crushed is the carton compressive strength, expressed in KN. When testing the compressive strength of the carton, be sure to set the pre-compression value (generally 220N) in accordance with the testing standard before testing.

Packaging drop test

The product will inevitably fall during handling or use. Testing its resistance to fall is also very important. Take a single-wing drop tester as an example. Perform a drop test underneath) Place the product on the support arm of the drop tester, and do a free fall test from a certain height (including a full drop on the edges, corners, and surfaces of the product).

Post time: Oct-10-2021