Emulsifier equipment refers to the equipment professionally used for high-speed shearing, dispersing and mixing of materials. This emulsifier is mainly used for the mixing, homogenization, emulsification, mixing, dispersion and other processes of certain fluid materials; when the main shaft and the rotor rotate relatively at high speed, a strong shear force is generated to make the materials fully mixed and pulverized! Vacuum removal and mixing bubbles in the process.
The working principle of the emulsifier:
The material is preheated and stirred in the water-oil pot first, and then directly sucked into the homogenizing pot under vacuum through the conveying pipeline. The material is stirred in the homogenizing pot by a polytetrafluoroethylene scraper (the scraper always conforms to the shape of the pot and sweeps away the material that sticks to the wall), constantly generating new interfaces, and then passing through the frame stirrer. Stir in the opposite direction. The blade shears, compresses and folds to stir, mix and flow to the homogenizer below, and then through the intense shearing process, the resulting effects, turbulence and other high-speed rotating shear slits between the rotor and the stator cut the material and Rapidly disintegrates into particles 200 nm ~ 2 μm.
The micronization, emulsification, mixing, homogenization and dispersion of materials can be completed in a short time. Since the homogenizer is in a vacuum state, the air bubbles generated during the mixing process of the material are sucked away in time. After the homogenization is completed, lift the lid of the tank and press the dump button switch to discharge the material in the tank into the outer container of the tank (or open the bottom valve and the pressure valve to discharge directly). The heating temperature of the homogenizing pot is displayed by the thermostat on the control panel; the homogenizing stirring and the paddle stirring can be used separately; they can also be used at the same time; the length of the homogenizing stirring time is controlled by the user according to the nature of the material, and can be Adjust via the control panel. After the work is completed, the cleaning ball valve can be opened to clean the pot.
Post time: Feb-26-2022