Fast delivery Industrial Water Purification Systems - Industrial Reverse Osmosis Water System – ZhiTong

Video

Product Description

1. Based on demands of raw water quality conditions and terminal water, single-stage RO +EDI can be used as terminal processing of
PW generation system. Quality of water produced by single-stage RO + EDI is stable, only slightly affected by fluctuation of raw.

2. The water quality conforms to requirements of Chinese pharmacopoeia, European pharmacopoeia and United States pharmacopoeia.

3. good mechanical strength, small compaction effect of porous support layer.

4. the process parameters of pure water equipment, such as flow, pressure, liquid level, water quality, temperature and other parameters are automatically detected, displayed and alarm chain.

5. The main equipment and accessories are imported high-quality international famous products or domestic products of the same quality.

6. Short-term outage: usually within a month, 0.5 ~ 1 hour protective operation is required every 3 days.

7. The desalination rate of ultra-thin composite membrane element can reach 99.5% and remove colloids, organics, bacteria and viruses in water at the same time.

8. Reverse osmosis can operate water continuously, the system is simple, easy to operate, and the water quality of the product is stable.

9. The south special SUS304 stainless steel water pump is selected in the pump series, with low operating noise.

10. When the water level of the automatic water tank reaches a certain level, the system starts to work. When the pure water tank is full of water, the system stops.

11. When the automatic water tank is at low water level, start water shortage protection, the system stops completely, manual and automatic operation can not be carried out.

12. When the reverse osmosis system is started up, it is cleaned on the machine each time, and the cleaning time is controlled in about 30 seconds (time is adjustable). When the reverse osmosis system runs for a period of time, it is cleaned regularly (time is adjustable).

13.. The produced water has high quality and good stability.

14. Continuous continuous water production, not due to regeneration and shutdown.

15. 97.Modular production, and can realize automatic control.

16.No acid and alkali regeneration, no sewage discharge.

17.No acid and alkali regeneration equipment and chemical storage and transportation.

18.Pretreatment system generally includes raw water pump, dosing device, quartz sand filter, activated carbon filter, filter, etc. Its main function is to reduce the pollution index of raw water and other impurities such as residual chlorine to meet the requirements of reverse osmosis inlet water.

19. Dynamic monitoring screen is provided for the actions of each component, such as water pump, valve and water tank level (remote monitoring can be upgraded if necessary).

Technical parameter:

Application

1. Electronic industry: picture tube, liquid crystal display, circuit board, integrated circuit chip, tube glass shell, computer hard disk, semiconductor, monocrystalline silicon semiconductor, etc.

2. Chemical industry: petrochemical, cosmetics, textile printing and dyeing technology, production water, wastewater treatment, etc.

3. Seawater industry: seawater oilfields, island areas, coastal water-deficient areas, well water, seawater, brackish water for direct drinking water, etc.

4. Food industry: production water, kimchi, coffee, mineral water, wine brewing water, etc.

5. Electroplating industry: production of automobiles, household appliances, batteries (storage batteries), surface coating of building materials products, and coated glass, etc.